|
|
|
|
|
|
|
|
| Did You Know |
Our load cells are designed and manufactured in the USA
click here |
|
|
|
|
Note: Display will
automatically exit setup mode and return to run mode if a button is not pushed
within 30 seconds.
 |
| 1. |
Press both buttons at the same time.
‘CAL’ will appear. Scroll down the main menu by pressing the
bottom button until ‘Ky 1’ appears. Press the top button. |
| 2. |
‘AL 1’,
‘PEAK’, or ‘tArE’ will appear. Scroll through
the menu by pressing the bottom
button and stop on ‘tArE’, press the top button (if the bottom button is
desired to be an alarm or a peak value, press accordingly). |
| 3. |
‘Ky 1’ will
appear again. Key 1 (bottom button) is now set as a tare
button. |
NOTE: By setting Key 1 as a tare button
Key 2 is automatically set as the Gross/Net function. After setting Key 1 as a
tare, the ‘Ky 2’ will no longer have the option of being an alarm, peak
or tare.
For more details please refer to the
owners manual |
|
|