|
HI-LO Limit Output Mode:
The HI-LO limit output mode determines the operation of the various HI-LO limits.
*The Hi Limit Output is turned on when the input value becomes larger than the set values.
*The LO Limit output is turned on when the input value becomes smaller than the set values.
The chart above shows the settings of the different modes. Mode 1 means that the Hi Limit, Hi-Hi Limit, and
Lo Limit all turn on when the input value becomes larger then the set value, and that the Lo-Lo Limit
is turned on when the input value becomes smaller then the set value.
To Set the Limit Output Relays:
- Press the Mode button
- Press the Comparison button
- Press the Page until ‘Comparison Mode’
appears on the screen. Select the ‘Comparison Mode’ tag. Enter in your desired mode (default is MODE 2). Press OK
- Press HOME to return to the run mode
|
|