Store
Service
Applications
Support
Contact
2 Products
Item Number | Load Capacity | Load Directions | Thread Size | Height In Inches | Length In Inches | Width In Inches | Outer Diameter In Inches | Connection Type | Mechanical Overload Protection | Integrated Teds | Connector Type | Ip / Nema Rating | Fatigue Rated | Material | Output Type | # Of Bridges/channels | Weight In Lb | Rohs | Custom Special |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
200 lb | Compression | 5/8-18 | 1.37 | 6.15 | 4.12 | 4.12 | Connector | No | No | 6 Pin Bendix Receptacle, PT02E-10-6P | IP61 | Yes | 17-4 PH S.S. | mA | 1 | 1.75 | Yes | N | |
150 lb | Tension & Compression | 5/8-18 | 1.37 | 6.15 | 4.12 | 4.12 | Connector | No | No | 6 Pin Bendix Receptacle, PT02E-10-6P | IP61 | Yes | 17-4 PH S.S. | VDC | 1 | 3 | Yes | N |
highlight_off
Model QLA133 is a Custom Pancake Load Cell designed for compression applications. The sensor has eight bolt-down holes along its outer diameter for easy mounting. It is available in light weight 200 lb capacity Anodized Aluminum and a fatigue rated 150 lb capacity 17-4 Stainless Steel version. This custom pancake has integrated analog output to allow simplified integration into PLC controllers. Typical applications for the QLA133 include press assembly, automotive seat and material testing where eccentric and extraneous loads could occur.
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Tel: (949) 465-0900
© 1998–2020 FUTEK Advanced Sensor Technology, Inc. All rights reserved.
