Storekeyboard_arrow_right Custom & Special Models keyboard_arrow_right QLA
Ring Load Cell donut load cell
QLA324

Custom Axial Load Ring

1 Products
settings
Item Number
Load Capacity
Inner Diameter In Inches
Outer Diameter In Inches
Height In Inches
Length In Inches
Width In Inches
Output Type
Connection Type
# Of Bridges/channels
Cable Type
Cable Length
Load Directions
Nonrepeatability
Max Operating Temperature
Min Operating Temperature
Max Excitation
Nonlinearity
Input Resistance
Ip / Nema Rating
Material
Description
Max Compensated Temperature
Min Compensated Temperature
Weight In Lb
Custom Special
67442.7 lb
5.512
9.06
0.984
9.06
9.06
mV/V
Cable
1
24 Awg 4 Conductor Braided Shielded Teflon Cable
20 ft
Compression
0.1 %RO
180 F
-40 F
18 VDC
0.5 %RO
350 Ohm
IP64
17-4 PH S.S.
QLA324 , 300 KN (67000 lb) , Custom Low Profile Thru Hole Donut Load Cell / Axial Load Ring , 5.51 in [140 mm] ID x 5.512 in [230 mm] OD x 0.984 in[25 mm] H , Material - 17-4 PH S.S. , 20 ft [6 m] long
160 F
60 F
8
Y

Model QLA324 is a custom Donut Load Cell (aka Ring Load Cell) built for press or inline applications. It has a robust construction of 17-4 precipitation hardened stainless steel, with an ID of 5.512” (140 mm) and a 20-ft (6.1 m) 4 conductor shielded Teflon cable with built-in strain relief. This ring load cell is low-profile, standing at 0.934” (2.37 cm). Despite it’s low profile, it has a rated capacity of 67000 lb (300 kN).

Ring Load Cell donut load cell  QLA324
Ring Load Cell donut load cell  QLA324
+
Z540-1 ANSI Certified17025 ISO Certified9001 ISO Certified13485 ISO CertifiedU.S. Manufacturer
+
Please follow us on linked inPlease follow us on twitterPlease follow us on youtubePlease Email us for additional info
+
10 Thomas, Irvine,
CA 92618 USA
All other trademarks, service marks and logos used in this website are the property of their respective owners.
© 1998–2023 FUTEK Advanced Sensor Technology, Inc. All rights reserved.