Storekeyboard_arrow_right Custom & Special Models keyboard_arrow_right QLA
QLA328

Custom Bending Beam Load Cell

2 Products
settings
Item Number
Load Capacity
Height In Inches
Length In Inches
Width In Inches
Output Type
Connection Type
# Of Bridges/channels
Cable Type
Cable Length
Load Directions
Nonrepeatability
Max Operating Temperature
Min Operating Temperature
Max Excitation
Nonlinearity
Input Resistance
Ip / Nema Rating
Material
Description
Max Compensated Temperature
Min Compensated Temperature
Weight In Lb
Custom Special
18 lb
0.375
2.873
0.576
mV/V
Cable
1
29 Awg 4 Conductor Spiral Shielded Silicone Cable
2 ft
Tension & Compression
0.1 %RO
200 F
32 F
15 VDC
1 %RO
1000 Ohm
IP54
17-4 PH S.S.
QLA328 , 18 lb , Custom Yoke Bending Beam Shear Force Load Cell , Side Mount , 2.873" [72.96 mm] Length , Material - 17-4 PH S.S. , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 2 ft Long
160 F
60 F
0.13
Y
18 lb
0.375
2.873
0.5
mV/V
Cable
1
29 Awg 4 Conductor Spiral Shielded Silicone Cable
2 ft
Tension & Compression
0.1 %RO
200 F
32 F
15 VDC
1 %RO
1000 Ohm
IP54
17-4 PH S.S.
QLA328 , 18 lb , Custom Yoke Bending Beam Shear Force Load Cell , Top Mount , 2.873" [72.96 mm] Length , Material - 17-4 PH S.S. , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 2 ft Long
160 F
60 F
0.13
Y

Model QLA328 is a custom yoke bending beam side-mount load cell designed with 2x 0.125” (3.18 mm) thru holes for mounting. This load cell is designed to measure bending loads and offers a rated capacity of 18 lb (80.06 N), with a safe overload protection of 27 (120.1 N). It is constructed from 17-4 PH stainless steel and includes conformal coating protection over the full strain gauge Wheatstone bridge. It is thermally compensated for 60 to 160 °F (15 to 72 °C). It offers a nonlinearity of ± 1.0% of the Rated Output. It includes a #29 AWG 4 conductor shielded cable 2 ft (0.6 m) long.

Custom Shear Beam Load Cell
Custom Shear Beam Load Cell
+
Z540-1 ANSI Certified17025 ISO Certified9001 ISO Certified13485 ISO CertifiedU.S. Manufacturer
+
Please follow us on linked inPlease follow us on twitterPlease follow us on youtubePlease Email us for additional info
+
10 Thomas, Irvine,
CA 92618 USA
All other trademarks, service marks and logos used in this website are the property of their respective owners.
© 1998–2022 FUTEK Advanced Sensor Technology, Inc. All rights reserved.