Storekeyboard_arrow_right Custom & Special Models keyboard_arrow_right QLA
QLA293

Custom Donut Load Cell

1 Products
settings
Item Number
Load Capacity
Thread Size
Inner Diameter In Inches
Outer Diameter In Inches
Height In Inches
Length In Inches
Width In Inches
Environmental Conditions
Features
Output Type
Connection Type
# Of Bridges/channels
Cable Type
Cable Length
Load Directions
Nonrepeatability
Max Operating Temperature
Min Operating Temperature
Max Excitation
Nonlinearity
Input Resistance
Ip / Nema Rating
Material
Description
Max Compensated Temperature
Min Compensated Temperature
Weight In Lb
Custom Special
20000 lb
M4x0.7
2.13
4.48
1.53
4.48
4.48
Water Resistance
Fatigue Rated
mV/V
Cable
1
24 Awg 4 Conductor Braided Shielded Teflon Cable
5 ft
Compression
0.5 %RO
185 F
-40 F
18 VDC
2 %RO
700 Ohm
IP64
17-4 PH S.S.
QLA293 , 20000 lb , Custom Donut Load Cell , Material - 17-4 PH S.S. , 2.13" [54.1 mm] ID with 2.44" [61.8 mm] Cbore x 0.98" [24.9 mm] Deep , 24 Awg 4 Conductor Braided Shielded Teflon Cable , 5 ft Long (Supersedes QSH01038)
126 F
-26 F
7.5
Y

Model QLA293 is a custom donut load cell that is designed to measure forces up to 20,000 lbs (~88.9 kN). It stands at a height of 1.530 in (38.86 mm), with an outer diameter of 4.48 in (113.8mm) and an ID of 2.13 in (54.10 mm). Constructed of 17-4 PH Stainless Steel, it is capable of operating in temperatures between – 40 to 185 °F (-40 to 85 °C). FUTEK can design custom donut load cells in various geometries and capacities. A common use for this style of load cell is to measure force of thrust bearings.

Custom Thrust Bearing Load Cell with Through Hole
Custom Thrust Bearing Load Cell with Through Hole
+
Z540-1 ANSI Certified17025 ISO Certified9001 ISO Certified13485 ISO CertifiedU.S. Manufacturer
+
Please follow us on linked inPlease follow us on twitterPlease follow us on youtubePlease Email us for additional info
+
10 Thomas, Irvine,
CA 92618 USA
All other trademarks, service marks and logos used in this website are the property of their respective owners.
© 1998–2023 FUTEK Advanced Sensor Technology, Inc. All rights reserved.