QLA367

Custom Load Button Load Cell with TEDS

1 Products

settings

Item Number	Load CapacityME	Thread Size	Outer Diameter In Inches	Height In Inches	Length In Inches	Width In Inches	Features	Output Type	Connection Type	# Of Bridges/channels	Connector Type	Cable Type	Cable Length	Load Directions	Nonrepeatability	Max Operating TemperatureME	Min Operating TemperatureME	Max Excitation	Nonlinearity	Input Resistance	Ip / Nema Rating	Material	Description	Max Compensated TemperatureME	Min Compensated TemperatureME	Weight In Lb	Custom Special	Safe Overload
QSH01632	100 lb	#6-32	1.23	0.39	1.23	1.23	RoHS, TEDS	mV/V	Cable & Connector	1	7 Pin Microtech Receptacle ER-7S	28 Awg 4 conductor Braided Shielded PVC Cable	1 ft	Compression	0.05 %RO	185 F	-40 F	18 VDC	0.15 %RO	700 Ohm	IP65	17-4 PH S.S.	QLA367 , 100 lb , Load Button Load Cell , Special Full Circuit Gauge , IEEE1451.4 TEDS , #6-32 Bottom Tapped Holes , Material - 17-4 PH S.S. , 28 Awg 4 Conductor Braided PVC Cable , 13 in with 7 pin 1.25mm Clik-Mate Molex Connector	160 F	60 F	0.23125	N	150 %RO

Model QLA367 is a custom load button load cell designed with TEDS IEEE1451.4 and 7 Pin Clik-Mate Molex connector. This load cell is designed to measure compression loads and offers a rated capacity of 100 lb (445 N), with a safe overload protection of 150 lb (667 N). This load cell features 3x #6-32 UNC female mounting provisions and is constructed from 17-4 PH stainless steel. It offers a nonlinearity of ± 0.15 % of the Rated Output. It includes an integrated 14 inch (356 mm) output cable, and is available in two configurations: conventional gage type, and custom integrated circuit. This load cell is designed for high reliability, OEM embedded solutions, and the cable package lends itself to quick, easy integration.