QLA317

Custom Load Cell

1 Products

settings

Item Number	Load CapacityME	Inner Diameter In Inches	Outer Diameter In Inches	Height In Inches	Length In Inches	Width In Inches	Environmental Conditions	Output Type	Connection Type	# Of Bridges/channels	Cable Type	Cable Length	Load Directions	Nonrepeatability	Max Operating TemperatureME	Min Operating TemperatureME	Max Excitation	Nonlinearity	Input Resistance	Ip / Nema Rating	Material	Description	Max Compensated TemperatureME	Min Compensated TemperatureME	Weight In Lb	Custom Special	Connection Code	Safe Overload
QSH01215	1500 lb	0.25	1.23	2.49	1.23	1.23	Pressure Rated	mV/V	Cable	1	26 Awg 4 Conductor Braided Shielded Teflon Cable	5 ft	Tension & Compression	0.5 %RO	200 F	-60 F	18 VDC	1 %RO	744 Ohm	IP64	17-4 PH S.S.	QLA317, 1500 lb , Custom Load Cell , AN6 male 9/16-18 flare threads, 1.25" OD x 2.5" L, Temperature Compensate from -40 to 150 F, 5 ft cable	150 F	-40 F	0.28125	Y	WC1	150 %RO

Model QLA317 is a custom miniature in-line load cell. It stands at 2.49 in (63.1 mm) in height, with a maximum outer diameter of 1.23 in (31.2 mm) and is designed to be used under positive pressure of 30 PSI max supplied through the 2x 0.25 in (6.4 mm) thru-holes. It offers a rated capacity of 1500 lb (6.67 kN), with a safe overload protection of 2250 lb (10 kN). It is constructed from 17-4 PH stainless steel, guaranteeing a nonlinearity of ± 1.0% of its rated output. It also features a #29 AWG, 4 Conductor shielded Teflon cable 5 ft (1.5 m) long, with a built-in strain relief.

QLA317 load cell is used to measure the drag force in the pressure tube of the aircraft trailing cone system. Given its hollow flexure, it allows the static pressure to flow through the load cell to the pressure transducer. The load cells were installed between the attachment point and the pressure tube.

Support