Store
Service
Applications
Support
Contact
1 Products
Item Number | Load Capacity | Thread Size | Inner Diameter In Inches | Outer Diameter In Inches | Height In Inches | Length In Inches | Width In Inches | Features | Output Type | Connection Type | # Of Bridges/channels | Connector Type | Load Directions | Nonrepeatability | Max Operating Temperature | Min Operating Temperature | Max Excitation | Nonlinearity | Input Resistance | Ip / Nema Rating | Material | Description | Max Compensated Temperature | Min Compensated Temperature | Weight In Lb | Custom Special | Connection Code | Safe Overload | Fatigue Rated |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
50000 lb | M12x1.75 | 5.827 | 10.71 | 1.97 | 10.31 | 10.71 | Fatigue Rated | mV/V | Connector | 1 | 6 Pin Bendix Receptacle, PT02H-10-6P | Tension & Compression | 0.1 %RO | 200 F | 0 F | 20 VDC | 0.5 %RO | 175 Ohm | IP65 | 17-4 PH S.S. | QLA373 , 50000 lb , Custom Low Profile Load Cell , Fatigue Rated , Material - 17-4 PH S.S. , 5.827" [148 mm] ID x 10.71" [272 mm] OD x 1.97" [50 mm] H , 6 Pin Bendix Receptacle , PT02E-10-6P | 160 F | 60 F | 23 | Y | CC1 | 150 %RO | Yes |
highlight_off
Model QLA350 is a custom low profile load cell designed to have a high measurement capacity relative to its height. Standing at only 1.97 inches (50..0 mm) tall, it is designed to measure up to 50000 lb (222.4 kN) and is fatigue-rated to withstand a high number of loading cycles. It features 8x female threads on the loading surface to allow for a uniformly distributed load.
Store Custom-sensors-and-instruments Load-cells-force-sensors Custom-tension-compression-load-cell-fatigue-rated-qla373 FUTEK Certifications
FUTEK Social Media
store custom-sensors-and-instruments load-cells-force-sensors custom-tension-compression-load-cell-fatigue-rated-QLA373 
All other trademarks, service marks and logos used in this website are the property of their respective owners.
© 1998–2023 FUTEK Advanced Sensor Technology, Inc. All rights reserved.