Miniature S-Beam Jr.® Load Cell

LSB200 , 2500 g , S-Beam Jr.® Load Cell , Material - 17-4 PH S.S. , M3x0.5-Thread , Overload Protection , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 1 ft Long w/ 4 Pin Lemo Receptacle - PHG.0B.304.CLLD (CC4)

Spec Sheet

3D Model Download

Extraneous Load Factor

Listed price is in U.S. currency and subject to verification along with availability

Description

This compact Miniature S-Beam Jr.™ Load Cell has become a signature low-capacity, high-resolution miniature load cell in FUTEK’s catalog. It is suitable for a wide range of applications, especially those that require high durability and accuracy in a small footprint.

The LSB200 model’s design is optimized for low capacities — from 10 to 250 grams [0.35 to 8.8 oz]. Within this capacity range, LSB200 delivers nonlinearity of only ±0.1% of rated output and withstands up to 1000% (10x) overload protection. These features, together with its small size (height is 0.75 [0.19 mm]) makes this force sensor one of our most sought-after models. It is compatible with our USB digital interface signal conditioner solutions.

For higher capacities ranging from 1 to 100 lbs [0.45 to 45 kg], please see our latest LSB205 Miniature S-Beam Jr.™ Load Cell.

Features

Miniature size: height of only 0.75 in [19 mm]
Up to 10x overload protection in tension and compression
Lightweight force sensor
Nonlinearity ±0.1% of rated output or better
Loads up to 1000 grams [35 oz]

LSB200 Original Miniature S-Beam Load Cell

Capacity	low-capacity — from 10g to 250g
Connection type	integrated cable
Integrated electronics	n/a

LSB201 Same base, enhanced features

Capacity	250g to 100lb
Connection type	integrated cable
Integrated electronics	n/a

LSB205 Same base, maximum capacity

Capacity	1lb to 100lb
Connection type	7-pin connector
Integrated electronics	IEEE1451.4 TEDs chip and PT-1000 temperature sensor

Technical Documents

Resources

Challenges in Designing and Manufacturing Haptic Sensors for Robotic Surgery Platforms

How to reduce electrical noise in your system

Tactile_Force_Measurement

Product Manual

S-Beam Load Cell Series Manual

Videos

LSB200 Installation Tool

Specifications

Calibration

Electrical

Mechanical

Performance

Temperature

	CHANNEL	MIN	TYP	MAX	UNIT
Calibration Excitation	1		5		Vdc
Excitation	1	1		10	Vdc
Input Resistance	1		350		Ohms nom.
Insulation Resistance	1	500			Mohms @ 50 Vdc
Safe Overload	1			1000	% of R.O.
Capacity	1			2500	Gram
Hysteresis	1	-0.1		0.1	% of R.O.
Nonlinearity	1	-0.1		0.1	% of R.O.
Nonrepeatability	1	-0.05		0.05	% of R.O.
Output Resistance	1		350		Ohms nom.
Rated Output	1		2		mV/V nom.
Compensated Temperature	1	14		113	F
Operating Temperature	1	-60		160	F
Temperature Shift Span	1	-0.02		0.02	% of Load/F
Temperature Shift Zero	1	-0.02		0.02	% of R.O./F

Related Instruments

IAA100 FSH03863

IAA100 , Full Bridge Strain Gauge Signal Conditioning Voltage Amplifier , +/-5 VDC , +/-10 VDC Output , 5 VDC Offset DIP Switch , Up to 25 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , Integrated 35 mm DIN Clip

IAA100 FSH04461

IAA105 FSH04453

IAA105 , Bluetooth® Configurable Full Bridge Strain Gauge Signal Conditioning Voltage Amplifier , Multiple Options Between +/-10 VDC , Up to 10 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , 35 mm DIN Clip

IAA200 FSH03864

IAA200 , Full Bridge Strain Gauge Signal Conditioning Current Transmitter , 4-20 mA Output , 12 mA Offset DIP Switch , Up to 25 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , Integrated 35 mm DIN Clip

IAA200 QSH02025

IAA200 , Full Bridge Strain Gauge Signal Conditioning Current Transmitter , 0-20 mA Output, Up to 25 kHz Bandwidth , Detachable Screw Terminal Connectors , Metallic Enclosure , Integrated 35 mm DIN Clip

IAA300 FSH03931

IAA300 , Ultra Low Noise Signal Conditioning Differential Strain Gauge Voltage Amplifier , For Full Bridge , +/-5 VDC , +/-10 VDC , Up to 50 kHz Bandwidth , Screw Terminal Connectors , Red Powder Coated , Integrated DIN Clip

IAC200 FSH02126

IAC200 , Non-Amplified Full Bridge Strain Gauge Load Cell Summing Junction Box , 1-4 Channel , IP65/NEMA 4X Rating , Material - Polyurethane , mV/V Input & Output

IAC200 FSH04736

IAC200 , Amplified Full Bridge Strain Gauge Load Cell Summing Junction Box w/ Voltage Output , 1-4 Channel , IP65/NEMA 4X , Material - Polyurethane , mV/V Input & 0-5 VDC, +/-5 VDC, 0-10 VDC, +/-10 VDC Analog Output , Up to 25 kHz Bandwidth

IAC200 FSH04737

IAC200 , Amplified Full Bridge Strain Gauge Load Cell Summing Junction Box With Current Output , 1-4 Channel , IP65/NEMA 4X Rating , Material - Polyurethane , mV/V Input & 4-20 mA Analog Output , Up to 25 kHz Bandwidth

IDA100 FSH03912

IDA100 , High Speed & High Resolution Programmable Analog Amplifier w/ 1 kHz Bandwidth & Up To 4800 SPS USB Output , +/-5 VDC or +/-10 VDC Analog Output , Powered By USB , Red Powder Coated Aluminum Enclosure, Integrated DIN Clip

IHH500 FSH03460

IHH500 Elite , Intelligent Digital Handheld Display , mV/V , VDC , Current , and Encoder Measurement , Analog Output , Alarm Relays , TEDS , and USB Output - Accessory Kit (FSH03583) With All Mating Connectors and SENSIT® Software Included

IHH500 FSH03571

IHH500 Pro , Intelligent Digital Handheld Display , mV/V , VDC , & mA Measurement , Analog Output , Alarm Relays , TEDS & USB Output , Only Power Supply Adapter is included

Related Accessories

AAA999 GOD01357

RESISTOR 150 KOHM (SHUNT) 1/4 W ±0.01% 10 ppm

CONNEC FSH03853

IDA100/QIA121 Cable Connector Assembly , 6 Pin Bendix (PT06A-10-6S-SR) to 4 Pin Lemo (FGG.0B.304.CLAD35) and 2 Pin Lemo (PHG.0B.302.CLLD42) with 1uF Capacitor , 2x 29 Awg 4 Conductor Spiral Shielded

HRDWAR MCP02406

Installation Tool For LSB200/LSB201/LSB205/LSB210/LRM200 , 22 AWG Thick , 6061-T6 , Red Anodized

IAA200 FSH04804

XAC100 MCP01165

XAC100 , Convex Spherical Stainless Steel Load Button with Inline M3x0.5 Male Thread, 17-4 PH S.S. Material (F1147-18)

XAC110 MCP01161

Load Plate , M3x0.5 Thread , Aluminum Material , 5 lb Max Off-Center Load (Sensors Rating May Be Lower)

XAC750 MCP02499

Thread Adapter M3x0.5 Male to #6-32-2A Male

XAC750 MCP02497

Thread Adapter M3x0.5 Male to 1/4-28 Male

XAC750 MCP02498

Thread Adapter M3x0.5 to #10-32-2A Male

XAC750 MCP02500

Thread Adapter M3x0.5 Male to M6x1 Male

ZCC940 FSH01785

ZCC940 , 30 ft Long , 4 Pin Lemo FGG.0B.304.CLAD to Cable Assembly , CC4 Connection , Material - PVC , 28 Awg 4 Conductors , Braided Shielded

ZCC940 FSH01790

ZCC940, 15 ft Long, 4 Pin Lemo FGG.0B.304.CLAD to Cable Assembly, CC4 Connection , Material - PVC, 28 Awg 4 Conductors , Braided Shielded

Applications

App 147
Trackpad / Touchpad Test Stand

App 151
Medical Guidewire Test

App 155
USB Insertion/Extraction Test

App 156
Robotic Glove Rehabilitation

App 157
Robotic Leg Rehabilitation Device

App 163
Medical Valve Sensors: TAVR Fatigue Testing

App 165
Touchscreen Haptic Feedback

App 174
Fluid Flow Rate Measurement

fluid flow rate measurement using load cell non contact flow sensor

App 180
Vacuum Compatible Sensors

App 181
Non-Magnetic Sensors Solutions

Non Magnetic load cell Sensors Solutions

App 132
Humanoid Robot Load Cell

App 131
Syringe Test Stand

App 130
OEM Test Stand

App 112
DNA Synthesis

App 111
Multihead Weigher

App 109
Linear Test Stand

App 104
Wire Tension Measurement

cable tension sensor transducer wire rope tension sensor load cell force tensiometer

App 101
Medical Bag Weighing

App 201
Occlusion sensor

occlusion sensor occlusion pressure sensor

Alternative Models

LSB201 QSH02031

LSB201 , 5 lb , S-Beam Jr.® Fatigue Rated Load Cell 2.0 , Overload Protection , RoHS Compliant , Material - 17-4 PH S.S. , M3x0.5-Thread , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 5 ft Long

Spec Sheet