Overview|Technical Documents|Specifications|Alternative Models

Custom Donut Load Cell

QLA341 , 1000 lb , Custom Thru Hole Donut Load Cell w/ 4-20 mA Amplifier , 1.8" [45.7 mm] ID x 2.675" [68 mm] OD x 0.5" [12.7 mm] H , Vibration Rated , 29 Awg 4 Conductor Spiral Shielded Silicone Cable , 18 in Long , Molex Connector

Spec Sheet

In Stock

Listed price is in U.S. currency and subject to verification along with availability

Description

Model QLA293 is a custom donut load cell that is designed to measure forces up to 20,000 lbs (~88.9 kN). It stands at a height of 1.530 in (38.86 mm), with an outer diameter of 4.48 in (113.8mm) and an ID of 2.13 in (54.10 mm). Constructed of 17-4 PH Stainless Steel, it is capable of operating in temperatures between – 40 to 185 °F (-40 to 85 °C). FUTEK can design custom donut load cells in various geometries and capacities.

Features

Features anti-rotation key
Available in amplified and non-amplified versions
Unique low-profile design
Vibration rated

Technical Documents

Resources

How to reduce electrical noise in your system

Specifications

Calibration

Electrical

Mechanical

Performance

Temperature

	CHANNEL	MIN	TYP	MAX	UNIT
Calibration Excitation	1		24		Vdc
Excitation	1	13		30	Vdc
Input Resistance	1		700		Ohms nom.
Safe Overload	1			150	% of R.O.
Capacity	1			1000	lbs
Hysteresis	1	-0.5		0.5	% of R.O.
Nonlinearity	1	-0.5		0.5	% of R.O.
Nonrepeatability	1	-0.5		0.5	% of R.O.
Output Resistance	1		700		Ohms nom.
Rated Output	1	15	16	16.1	mA
Compensated Temperature	1	60		160	F
Operating Temperature	1	-60		185	F
Temperature Shift Span	1	-0.01		0.01	% of Load/F
Temperature Shift Zero	1	-0.01		0.01	% of R.O./F

Alternative Models

IHH500 FSH03460

IHH500 Elite , Intelligent Digital Handheld Display , mV/V , VDC , Current , and Encoder Measurement , Analog Output , Alarm Relays , TEDS , and USB Output - Accessory Kit (FSH03583) With All Mating Connectors and SENSIT® Software Included

Spec Sheet