load cell calibration kit Force sensor calibration kit

QLA383

Low Profile Portable Calibration Tripod

3 Products

settings

Item Number	Load CapacityME	Length In Inches	Height In Inches	Outer Diameter In Inches	Width In Inches	Description	Output Type	Connection Type	# Of Bridges/channels	Connector Type	Cable Length	Load Directions	Nonrepeatability	Max Operating TemperatureME	Weight In Lb	Min Operating TemperatureME	Custom Special	Max Excitation	Nonlinearity	Input Resistance	Material
QSH01776	35.2739 oz, 11.7578 oz	2.6	0.275	2.6	2.6	QLA383 , 1000 g , Low Profile Portable Calibration Tripod , Material - Aluminum, Hirose 12 Pin Receptacle	mV/V	Connector	3	12 Pin Hirose Mating Connector, LX40-12P		Compression	0.05 %RO	160 F	0.19841604	60 F	Y	10 VDC	0.1 %RO	350 Ohm	2024-T4
TPS01020	35.2739 oz	2.6	0.275		2.6	QLA383 , 1000 g , Force Load Cell w/ Hirose 12 Pin Receptacle , 66.8 mm OD x 6.98 mm H , 5 point Compression Calibration , w/ Mating 29 Awg 4 Conductor Spiral Shielded Silicone Cable/Connector Package , 5 ft Long, w/ 3x USB220									0.19841604		Y
TPS01031	35.2739 oz	2.6	0.275	2.6	2.6	QLA383 , 1000 g , Low Profile Force Plate Calibration Tripod For Touch Screens , 67 mm OD x 7 mm H , 5 point Compression Calibration , w/ Mating Silicone Cable/Connector Package , 5 ft Long, w/ 3x IAA100 for 0-10 VDC Output	VDC	Connector	3		5 ft	Compression			0.19841604		Y				2024-T4

QLA383 Low Profile Portable Calibration Tripod is designed for industries such as pharmaceuticals, medical, and Test and Measurements. This sensor allows you to continuously monitor and calibrate your measuring equipment to meet government and industry regulations.

QLA383 load cell calibration kit is a precision load cell that can be paired to either analog IAA amplifier (TPS1031) or digital USB amplifier (TPS1020) that reads out directly in engineering units, ensuring precise and reliable results. Whether you're calibrating force sensors, load cells, or other measuring equipment, our QLA383 calibration kit has got you covered.

QLA383 reference load cell can also be installed in your testing machine or press to apply loads, using appropriate fixtures and adapters.

As an added bonus, our force sensor calibration kit is NIST traceable, so you can have confidence in the accuracy of your measurements. Don't risk inaccurate results or regulatory compliance issues.