IPM650 play_arrowFSH03633

Panel Mount Display

IPM650 Pro , Intelligent Panel Mount , mV/V , VDC , Current Measurement , Analog Output , Alarm Relays , TEDS and USB Output
Listed price is in U.S. currency and subject to verification along with availability
Digital Load Cell reader readout display panel mount
Digital Load Cell reader readout display panel mount
load cell readout digital display IPM650
IPM650
panel mount load cell display IPM650
Description

The IPM650 Intelligent Panel Mount is FUTEK’s solution that can be easily integrated to work with Load Cells, Torque Sensors and Pressure Sensors. The IPM650 Digital Load Cell Display has an input range of up to +/-500 mV/V. Beside the mV/V input, device accepts amplified output sensors in range of ± 12 VDC or up to 30 mA. It also has two individual relays and two analog voltage and analog current output. This load cell display unit provides additional 24 VDC / 5 VDC as power supply for sensors with a built-in amplifier. FUTEK’s IPM650 Load Cell Display also supports TEDS which makes it easy to switch between different sensors. A high speed/ low noise/ high resolution (24 bits) ADC is integrated in the device to make it suitable for high accuracy measurements. This IPM650 Load Cell Display also has the capability of displaying values onto a computer through a USB link.


Load cell digital displays are necessary where the load or force measurement application requires that the load to be displayed locally in the field or laboratory as well as displaying the results on a PC, DAQ or PLC. In those cases, one can use FUTEK IPM650 Digital Load Cell Display. Each load cell readout can be used to connect up to 14 sensors profile.


The IPM650 is not just a Digital Load Cell display (strain gauge display or weight meters) it goes beyond, indicating the force measurement readings, exciting the load cell bridge circuit and reading its mV/V output signal. The more advanced the digital load cell display is, the more capabilities it has to condition the signal and communicate with peripheral devices, such as a computer, PLC, DAQ, or remote display unit.

Features
  • Measures mV/V Strain Gauge, +/-10 VDC, or 0-25 mA Inputs
  • 21k point data logging
  • Sampling up to 4800 sps
  • Keypad options (Track/Hold - Peak/Valley Reset - Unit - Tare/Gross-Shunt - Channel - Display-Menu)
Videos
video
FUTEK IPM650 - Intelligent Digital Transducer Display
video
Intro Video | Digital Load Cell Indicator | Intelligent Panel Mount Load Cell Display
video
IPM650 Profile Setup Guide
Specifications
Electrical
Error
Interference
Mechanical
Performance
Set-up
Temperature
CHANNELMINTYPMAXUNIT
Bridge Resistance
1
30
Ohms nom.
Excitation
1
5
Vdc
Input Range
1
-500
500
mV/V nom.
1
-12
12
Vdc
1
30
mA
Input Voltage
1
100
240
Vac
Error
1
-0.15
0.15
% of Load
2
-0.06
0.06
% of Load
Communication Interface
1
USB
Weight
1
1.9
lbs
Analog Output
1
5
Vdc
1
-5
5
Vdc
1
20
mA
1
4
20
mA
1
25
mA
1
5
25
mA
Capacity
1
2
mV/V nom.
2
10
Vdc
Display Resolution
1
3
7
Digits
Nonlinearity
1
-0.01
0.01
% of R.O.
Rated Output
1
1.995
2.005
mV/V nom.
2
10
Vdc
Power Supply
1
12
Vdc
Sample Rate
1
5
4800
Samples / Sec
Operating Temperature
1
-4
158
F
Storage Temperature
1
-22
176
F
Related Accessories
APA300 , IPM650 Power Supply Kit with Interchangeable AC Plugs, 18 W, 15 VDC Output , 5 ft Long
SENSIT Test and Measurement Software Suite , Version 2.7 for use with IDA100, IHH500, IPM650, USBXXX . Compatible with Windows 7, 8.1, 10, and Windows 11 , One License Required Per Seat (Contact factory for quantity pricing)
USB 2.0 Hi-Speed A/B Cable with Ferrite Chokes (M/M), 6-ft.
IPM650 , 8 Pin Terminal Connector Block Plug , SKT 8 POS 5.08MM , for VDC and mA Amplified Sensor Connections
IPM650 , 6 Pin Terminal Connector Block Plug , SKT 6 POS 5.08MM , for mV/V Non-amplified Sensor Connections & TEDS IEEE1451.4 Input
IPM650 , 4 Pin Terminal Connector Block Plug , SKT 4 POS 5.08MM , for Relay & Analog Output Connections
IPM650 Rear Stand w/ Slip Protection Bumpers , Black Anodized
ZCC994 , Sensor Panel Mount Cable Assembly , also Supports Sensors w/ TEDS Kits , for IPM650 w/ GOD02975 or FSH03585
ZCC995 , Analog Output/Relay/Alarm Cable Assembly for IPM650
Applications
Alternative Models
FSH03460
IHH500 Elite , Intelligent Digital Handheld Display , mV/V , VDC , Current , and Encoder Measurement , Analog Output , Alarm Relays , TEDS , and USB Output - Accessory Kit (FSH03583) With All Mating Connectors and SENSIT Software Included
play_arrow Spec Sheet
+
Z540-1 ANSI Certified17025 ISO Certified9001 ISO Certified13485 ISO CertifiedU.S. Manufacturer
+
Please follow us on linked inPlease follow us on twitterPlease follow us on youtubePlease Email us for additional info
+
10 Thomas, Irvine,
CA 92618 USA
All other trademarks, service marks and logos used in this website are the property of their respective owners.
© 1998–2022 FUTEK Advanced Sensor Technology, Inc. All rights reserved.