Store
Service
Applications
Support
Contact
2 Products
Item Number | Load Capacity | Load Directions | Thread Size | Height In Inches | Length In Inches | Width In Inches | Outer Diameter In Inches | Integrated Teds | Connection Type | Connector Type | Cable Type | Cable Length | Output Type | Ip / Nema Rating | Material | Mechanical Overload Protection | Fatigue Rated | # Of Bridges/channels | Weight In Lb | Rohs | Custom Special |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100 lb | Compression | #6-32 | 0.38 | 1.98 | 1.98 | 1.98 | No | Cable & Connector | 4 Pin Lemo Receptacle Connector, PHG.0B.304.CLLD | 29 Awg 4 Conductor Spiral Shielded Teflon Cable | 1 ft | mV/V | IP64 | 17-4 PH S.S. | No | No | 1 | 0.375 | Yes | N | |
300 lb | Compression | #6-32 | 0.38 | 1.98 | 1.98 | 1.98 | No | Cable & Connector | 4 Pin Lemo Receptacle Connector, PHG.0B.304.CLLD | 29 Awg 4 Conductor Spiral Shielded Teflon Cable | 1 ft | mV/V | IP64 | 17-4 PH S.S. | No | No | 1 | 0.375 | Yes | N |
highlight_off
The LAU200 Pedal Force Load Cell offers an ideal solution for Automotive Applications. Pedal Force Sensors are designed to measure load applied to the brake, accelerator, and clutch pedals during acceleration, deceleration, and transmission shift events. From its 17-4PH Stainless Steel one piece construction to its low profile design (Off-center loading error of <4%), the LAU200 Pedal Load Cell offers a great measurement system with impressive tolerances. This unit comes with a removable mounting plate and it includes a Lemo mating connector with PVC cable. The LAU200 Pedal Force Load Cell is manufactured in US, and similar to our entire Load Cell product line, uses metal foil strain gauge technology.
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Tel: (949) 465-0900
© 1998–2021 FUTEK Advanced Sensor Technology, Inc. All rights reserved.
