miniature compression load cell application

LCM300

Miniature Threaded In Line Load Cell

10 Products

settings

Item Number	Load CapacityME	Thread Size	Outer Diameter In Inches	Height In Inches	Length In Inches	Width In Inches	Environmental Conditions	Features	Output Type	Connection Type	# Of Bridges/channels	Connector Type	Cable Type	Cable Length	Load Directions	Nonrepeatability	Max Operating TemperatureME	Min Operating TemperatureME	Max Excitation	Nonlinearity	Input Resistance	Ip / Nema Rating	Material	Description	Max Compensated TemperatureME	Min Compensated TemperatureME	Weight In Lb	Custom Special
FSH04530	50 lb	M6x1	0.98	1.21	0.98	0.98	Submersible, Water Resistance	RoHS	mV/V	Connector	1	4 Position Micro Circular Receptacle			Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.25 %RO	740 Ohm	IP67	17-4 PH S.S.	LCM300 , 50 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , IP67 Rated, Material - 17-4 PH S.S. , M6x1-Thread , 4 Pin Micro Receptacle	160 F	60 F	0.09375	N
FSH04531	100 lb	M6x1	0.98	1.21	0.98	0.98	Submersible, Water Resistance	RoHS	mV/V	Connector	1	4 Position Micro Circular Receptacle			Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.25 %RO	740 Ohm	IP67	17-4 PH S.S.	LCM300 , 100 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , IP67 Rated, Material - 17-4 PH S.S. , M6x1-Thread , 4 Pin Micro Receptacle	160 F	60 F	0.09375	N
FSH03886	250 lb	M6x1	0.98	1.21	0.98	0.98		RoHS	mV/V	Cable	1		28 Awg 4 conductor Braided Shielded PVC Cable	10 ft	Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.25 %RO	740 Ohm	IP64	17-4 PH S.S.	LCM300 , 250 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , Material - 17-4 PH S.S. , M6x1-Thread , 28 Awg 4 Conductor Braided Shielded Clear PVC , 10 ft Long	160 F	60 F	0.09375	N
FSH04532	250 lb	M6x1	0.98	1.21	0.98	0.98	Submersible, Water Resistance	RoHS	mV/V	Connector	1	4 Position Micro Circular Receptacle			Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.25 %RO	740 Ohm	IP67	17-4 PH S.S.	LCM300 , 250 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , IP67 Rated, Material - 17-4 PH S.S. , M6x1-Thread , 4 Pin Micro Receptacle	160 F	60 F	0.09375	N
FSH04533	500 lb	M6x1	0.98	1.21	0.98	0.98	Submersible, Water Resistance	RoHS	mV/V	Connector	1	4 Position Micro Circular Receptacle			Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.25 %RO	740 Ohm	IP67	17-4 PH S.S.	LCM300 , 500 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , IP67 Rated, Material - 17-4 PH S.S. , M6x1-Thread , 4 Pin Micro Receptacle	160 F	60 F	0.09375	N
FSH03933	1000 lb	M6x1	0.98	1.21	0.98	0.98		RoHS	mV/V	Cable & Connector	1	4 Pin Lemo Receptacle Connector, PHG.0B.304.CLLD	28 Awg 4 conductor Braided Shielded PVC Cable	11 in	Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.5 %RO	740 Ohm	IP64	17-4 PH S.S.	LCM300 , 1000 lb , Tension and Compression Load Cell , RoHS Compliant (Lead free),Material - 17-4 PH S.S. , M6x1-Thread , 28 Awg, 4 Conductor Braided Shielded Clear PVC Cable w/ 4 Pin Lemo Mating Connector (PHG.0B.304.CLLD35) , 282 mm Long	160 F	60 F	0.09375	N
FSH04534	1000 lb	M6x1	0.98	1.21	0.98	0.98	Submersible, Water Resistance	RoHS	mV/V	Connector	1	4 Position Micro Circular Receptacle			Tension & Compression	0.1 %RO	200 F	-45 F	15 VDC	0.25 %RO	740 Ohm	IP67	17-4 PH S.S.	LCM300 , 1000 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , RoHS Compliant , IP67 Rated , Material - 17-4 PH S.S. , M6x1-Thread , 4 Pin Micro Receptacle	160 F	60 F	0.09375	N
QSH01729	50 lb	M6x1	0.98	1.21	0.98	0.98	High Temperature		mV/V	Cable	1		26 Awg 4 Conductor Braided Shielded Teflon Cable	10 ft	Tension & Compression	0.1 %RO	302 F	60 F	15 VDC	0.5 %RO	700 Ohm	IP65	17-4 PH S.S.	LCM300 , 50 lb , High Temperature Tension & Compression Load Cell (Miniature/Inline Threaded) , Operating Temperature from 60-302 F [16-150 C] , Material - 17-4 PH S.S. , M6x1-Thread , 26 Awg 4 Cond. Braided Shielded Teflon , 10 ft Long	302 F	60 F	0.09375	Y
QSH01730	50 lb	M6x1	0.98	1.21	0.98	0.98		RoHS	mV/V	Cable & Connector	1		28 Awg 4 conductor Braided Shielded PVC Cable	8 in	Tension & Compression	0.1 %RO	200 F	-45 F	20 VDC	0.5 %RO	740 Ohm	IP65	17-4 PH S.S.	LCM300 , 50 lb , Tension & Compression Load Cell , 32-122 F Compensated Range, Output 1.8 to 2.0 mV/V, RoHS Compliant, Material - 17-4 PH S.S., M6x1-Thread , 28 Awg 4 Conductor Braided Shielded Clear PVC , 8 in Long w/ Mini USB Type B	122 F	32 F	0.1	Y
QSH02215	100 lb	M6x1	0.98	1.21	0.98	0.98	Cryogenic, Vacuum Rated		mV/V	Cable	1		26 Awg 4 Conductor Braided Shielded Teflon Cable	10 ft	Tension & Compression	0.1 %RO	200 F	-60 F	15 VDC	0.25 %RO	740 Ohm	IP65	17-4 PH S.S.	LCM300 , 100 lb , Tension & Compression Load Cell (Miniature/Inline Threaded) , Vacuum Rated , Operating Temperature Range -51 to +93C , Material - 17-4 PH S.S. , M6x1-Thread , 26 Awg 4 Conductor Braided Shielded Teflon , 10 ft Long	160 F	-49 F	0.09375	N

> LCM300

Small, flexible, accurate

The LCM300 is a multi-dimensional miniature load cell that measures tension and compression loads in endurance, press, and inline applications that require a highly accurate sensor with a small footprint. It’s available in a wide range of capacities that range from 50 to 1000lb (23 to 454 kg). The standard LCM300 sensor can also be customized to meet your specific requirements.

The LCM300 is now offered with an integrated connector that makes it fully IP67-rated for high water resistance and temporary submersibility. The connectorized 4-position micro receptacle allows you to easily remove the cable from the sensor like a plug from a socket. This new feature protects the sensor from cable damage, as you can easily replace a faulty wire, and it also makes the installation process much easier, as there is no cable to rotate when the sensor is threaded into fixtures.

In addition, the LCM300 is also available in the original design, which features a cable connection with a 10-foot (3m) long 28 AWG 4 conductor braided shielded cable. This model can also be modified to suit OEM applications. FUTEK offers application and engineering resources during DFM/DFX stage upon request.

height: 13.2mm
diameter: 24.9mm
IP rating: IP67

Made to be accurate

The LCM300 delivers a remarkably high natural frequency (starting at 6.1 kHz and going up to 29 kHz) which provides a fast response time that benefits accuracy and cycle time reduction. In addition, special design and manufacturing touches further enhance the sensor’s performance, such as a highly customized strain element that greatly reduces solder joints, increasing the sensor’s reliability.

Reducing error

A highly customized strain element has been designed to allow more strain measurement around the active sensor element, which reduces reproducibility errors from off-axis loads, and allows for an impressive 0.25% nonlinearity and hysteresis performance.

High stiffness

The precision of the LCM300 is also augmented by its stiffness, which leads to a very low deflection with some capacities as low as 0.001in.

Calibration included

The LCM300 has been tested by FUTEK’s world-class calibration department and is NIST traceable. We can also reduce hidden costs and setup time by calibrating your sensor with FUTEK electronics of your choice. In addition, we offer calibration to ANSI Z540-1 and ISO 17025 standards upon request.

Easy mounting options

The LCM300 has male threads on both ends for easy and flexible mounting options. Also, the compact design allows you to mount it in different locations, including for those applications with limited spaces.

Capacity (lb)	2.2	5	10	25	50	100	250	500	1000	2000	3000	4000	5000	7500	10000	20000	50000
Capacity (kg)	1	2	5	11	23	45	113	225	450	900	1350	1800	2250	3375	4500	9000	22500
LCM100	yes	yes	yes	yes
LCM200							yes	yes	yes
LCM300					yes	yes	yes	yes	yes
LCM325										yes	yes
LCM350												yes	yes
LCM375														yes	yes
LCM525																yes
LCM550																	yes

Plug in, plug out

The newer versions feature the 4-position micro receptacle. This gives the load cell greater flexibility and durability, as a damaged or cut cable can now easily be replaced, saving the user time and resources.

The 4-position micro cable connector is shown here with the keyed mating face to reduce mating errors. The image shows another model.

Eliminating moisture

The assembly process of the 4-position micro receptacle version eliminates moisture ingress through the connection location. With an IP67 rating, the product can withstand submersion in one meter of water for at least 30 minutes. This opens up more options for applications as it will allow outdoor usage in wet, rainy, or highly humid conditions.

The 4-position micro cable connector is shown here on another sensor model.

Conductor Braided Shielded Clear PVC

A braided shield physically covers the signal wires while blocking any interference from stray magnetic and static electric fields. Additionally, the metallic load cell housing blocks all interference and unwanted environmental conditions that would reduce the accuracy and reliability.

Robust construction

The seam-welded stainless steel body provides outstanding strength and corrosion resistance and provides enhanced protection against physical damage in addition to withstanding other harsh environmental conditions. A special heat treatment process has been applied to the flexure to improve durability, extending the life-cycle of the sensor.

Best-in-class material

The exceptional quality of this sensor makes it highly durable and reliable. Its body is made of aerospace-grade 17-4 precipitation hardened stainless steel, which provides high strength, high hardness, and corrosion resistance over a wide temperature range.

Made in California

Designed and manufactured in-house, using US-sourced materials. Our multidisciplinary engineering teams, high precision machining center, state-of-the-art quality assurance systems, and R&D and manufacturing facilities are all under one roof, allowing us to continuously reinvent and refine our products and processes.